ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

tooling, accessories etc., in the service area in a way that ensure easy and trouble free handling by the operator ant no accident occurs. Keep workpieces, tools and accessories clean without chips or oil deposits. Keep the machine and service area around clean and tidy. Arrange materials, Warning: Thoroughly clean the workpiece to be machined from deposits and oil the workpiece before placing and chucking. Warning: Keep clean and dry service area around the machine. Warning: Never use pressurized air for machine or chips cleaning . The machine operator must wear safety work clothing, glasses, bonnet and shoes.

Long hairs to be kept under the bonnet, clothing buttoned and shoes ties fastened. Warning: When in operation do not wear hand rings, wrists, chains, rings and others that may be caught from the moving machine parts. When operate the machine with coolant follow the coolant manufacturer instructions for safety. When chucking a workpiece to be machined ensure the chucking so that no hazard occurs during rotation. When operate with various chucking accessories observe the chucking device manufacturer instructions for mounting and maximum speed of rotation allowed. Always select those cutting conditions that are safety for operator and machine. Warning:

It is not admissible to operate with dead centre on tailstock quill. Very Dangerous! In emergency the operator must immediately stop the machine and let his foreman or authorized service technician. Warning: It is not admissible to eliminate mechanical or electrical trouble by persons that are not trained and duly authorised for the purpose. Recommendation: Chip deposits on the chucking accessory and cutting tool to be eliminated by a suitable safety tool. Fig. 2-1 below shows a recommended for this purpose tool. Fig. 2-1. Recommended tool for eliminating chips C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 14/67