3.1.2 INSTRUCTIONS FOR LIFTING AND DISPLACEMENT MACHINE ON WOODEN PALLET (See Fig.3-1) Crane, hoist or another lifting equipment using ropes or belts having capacity according machine gross weight can perform lifting and displacement of the machine. Rods of mild steel (Ст45, С45) and diameter of 50mm are protruded through machine feet holes. Rods length should be bigger then machine feet width. Before lifting ensure that all movable parts are fixed. The tailstock should be position end of bed and clamped; steady rest to be fixed close to tailstock and carriage to be position in the bed middle and clamped by lock plates; the half nut must be engaged.
3.2 LIFTING AND DISPLACEMENT MACHINE IN WOODEN CASE Warning: The equipment for lifting and displacement must comply with machine weight. Table 3-2 below shows the approximate machine gross weight. Table 3-2. Approximate gross weight of machine in wooden case Fig. 3-2. Lifting and displacement machine in wooden case Warning: Do not stay under lifted object. Grave danger. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 17/67 Model C8С CU325 DBC (mm) Weight Weight (kg) (kg) 750 900 900 1000 1000 1000