ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

3.3 MACHINE UNPACKING 3.3.1 PRELIMENERY CHECKS Upon machine arrival check machine packing condition and the delivery items in accordance with the order and section 1.2. If damages or missing items during transportation found please immediately inform your supplier. 3.3.2 UNPACKING MACHINE PACKED ON WOODEN PALLET The machine is fixed on the wooden pallet by bolts. Remove all fixing bolts and machine is ready to be lifted and displaced in compliance with the instructions under section 3.1. 3.3.3 UNPACKING MACHINE PACKED IN WOODEN CASE Unpack the machine as following:

First remove wooden case top Remove the wooden case wall from the carriage side Remove both wooden case walls (from headstock side and tailstock side) Remove the last wooden case wall (from the machine rear side) Remove all bolts that fixed the machine to wooden case bottom and machine is ready to be lifted and displaced in compliance with the instructions under section 3.1. 3.4 CLEANING THE MACHINE Before shipment from the factory all machine parts not painted are covered with a compound that protects them against corrosion during transportation and storage.

Clean the anti-corrosion compound by soft cloth damped with solvent like mineral alcohol or aliphatic petrol solvent commercially available. Immediately dry the cleaned parts by soft cloth. Do not use hard brush or another metal accessories that may damage the machine surfaces. Avoid splashing solvent over painted machine surfaces for some solvents may damage the paint. Warning: Do not use high volatile and combustible solvents that are dangerous for the electric installation and firing. Do not smoke or use fire 10 metres around when cleaning the machine. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 18/67