ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

4.3 MACHINE MAIN PARTS AND CONTROLS Fig.4-1, Fig.4-2, Fig.4-3 show the machine main parts and controls. 1 Bed 2 Feet 3 Gearbox 4 Feed box 5 Apron 6 Lower carriage 7 Upper carriage 8 Tailstock 9 Drive 10 Control shaft 11 Quadrant 12 Toolholder 13 Protection stop 14 Quadrant door 15 Guards 16 Rests, complete 17 Electric cabinet 18 Handle for setting left hand and right hand thread 19 Control panel 20 Coolant system 21 Work light 22 Control lever for spindle forward or reverse direction of rotation or stop. 24 Handle for speed step select. 25 Handle for speed range select. 26 Handle for speed step. 27 Emergency stop push button 28 Handle for feed pitch or thread select.

29 Handle for feed pitch or thread select. 30 Handle for shifting the motion to the lead shaft or lead screw. 31 Handle for nut engagement or disengagement. 32 Control lever for the longitudinal and cross travels. 33 Handwheel for manual longitudinal travel. 34 Handwheel for manual cross travel. 35 Handwheel for manual upper carriage manual travel. 36 Vernier for longitudinal travel read out. 37 Handwheel for manual travel of the tailstock quill. 38 Handwheel for clamping the quill . 39 Handwheel for clamping the tailstock . 40 Main power disconnector 42 Emergency stop pedal 43 Handwheel for cross and longitudinal automatic feed. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 24/67