4 OPERATION WITH THE MACHINE 4.1 GENERAL The following information is designated to an operator that is trained and authorized to operate with universal lathe machines. 4.2 APPLICICATION OF THE MACHINE This lathe machine may be applied for machining of internal and external surfaces, threading of metric, inch, module, diameter-pitch threads on workpieces of steel, cast iron, non-ferrous metals and plastics. Workpiece taper surfaces may be machined using the taper turning attachment (option). The maximum workpiece dimensions that may be machined on this machine can be found under section 1.3. Warning:
This machine may be only used in compliance with its application and technical specifications under section 1.3. Any application of this machine outside its specifications or any modification or usage of non-original parts may lead to hazards and may void the machine guarantee. Emergency stop: There is an emergency stop pushbutton (red mushroom) on these machines. An emergency stop pedal also is available as an option. ( С8С СЕ; СU325; СU325 СЕ). These emergency stop devices must be used in emergency circumstances only. Do not use these devices as a normal operation stop of the machine. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 23/67