ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

Check all machine control levers and handles ; If the machine will operate with coolant fill the coolant tank with coolant liquid as per section. 4.9. Turn the main switch on electric cabinet on position “I”. The indicator on control panel should goes on indicating electric cabinet live; Ruin the drive motor by pressing motor Start pushbutton; At this moment verify if the drive motor direction of rotation. The correct direction of rotation must comply with the arrow marked on gearbox drive pulley ( Counter clockwise). If direction of rotation found incorrect it must be immediately adjusted immediately by change the connection of two input phases in the electric cabinet.

Verify the gearbox function testing all speed ranges; Verify coolant system function; Run the machine for 2-hours of idle operation. Then check the oil level in the respective boxes. Add oil if necessary. Refer to section 5 “Lubrication”; After two-shift machine operation check the main drive V-belts tensioning and adjust if necessary. Refer to section 6 “Machine maintenance”. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 22/67