According the customer order these machines can be delivered either according DIN55027/ISO702-III spindle nose or USAS B-5.9-D1/ ISO702-II (Camlock) spindle nose. 4.7.1 MOUNTING A CHUCKING DEVICE ON SPINDLE NOSE (DIN55027/ISO702-III) FIG.4-13 When a chucking device has to be mount on spindle nose as per Fig.4-13 turn the bayonet plate 1 clockwise (spindle forward) so that nuts 2 go through two-step hole splines of the bayonet plate. Fit the chucking device on spindle taper so that mounting bolts 4 and nuts 2 go through spindle holes and the round sleeve 5 align with the chucking device opening. Then turn the bayonet plate counterclockwise and tighten nuts 2.
To dismount the chucking device proceed in opposite order. Fig. 4-13 4.7.2 MOUNTING A CHUCKING DEVICE ON SPINDLE NOSE (USAS B-5.9-D1/ISO702-II) (CAMLOCK), FIG. 4-14 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 32/67