ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

Place the cams 2 (radial located on the spindle) on zero position so that cam and spindle markings align. Fit the chucking device 1 on spindle taper so that studs 4 go through spindle holes. The zero lines of chucking device and spindle shall also align. Tighten cam 2 by turning them clockwise. To dismount the chucking device proceed in opposite order. Fig. 4-14 Warning: When mount or dismount chucking device avoid impacts on spindle or chucking device. Risk of serious damage . Warning: For safety operation never exceed the chucking device maximum speed of rotation as marked on the chucking device or mentioned in the manufacturer instructions.

4.8 COOLANT SYSTEM Fig.4-15 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 33/67