ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

6.2.5. ADJUSTMENT THE CLEARANCE BETWEEN BED SLIDEWAY AND CARRIAGE BASE PLATE (See Fig.6-7A and Fig.6-7B) ADJUSTMENT THE CLEARANCE FROM “V” SLIDE WAY SIDE ( See Fig.6-7А) Procedure: Loose bolt 1 until plate 2 is free; .Fit plate 2 surface “А” so that after tighten plate 2 with bolt 1 desired clearance between plate 2 and lower plane of bed slide way is achieved; Fig.6-7А. Adjustment the clearance from “V” slide way side ADJUSTMENT THE CLEARANCE FROM “FLAT SLIDE WAY” SIDE (See Fig.6-7B) Procedure: Loose locknuts 3; By tighten bolts 4 desired clearance between plate 5 and lower flat plane of bed slide way is achieved; When desired clearance is achieved tighten locknuts 3. Fig.6-7B.

Adjustment the clearance from flat slide way side Verification of the adjustment When manually turn the hadwheel for carriage longitudinal traverse the carriage must move smooth and without resistance. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 48/67