6.2.9. CHANGE THE SHARE PIN ON FEED BOX OUTPUT SHAFT (See Fig.6-12) The share pin 1 serves as a protection that is shared when dangerous overloud occurs and it terminates the motion transmission from feed box to carriage. When it occurs it is necessary to change the share pin with a spare one. For the purpose the machine is delivered with 2 share pins as standard spare parts. Procedure: Loose screw 5; Remove washer 4 and bushings 2 and 3; Drift the share pin 1 out of the shaft; Drift the share pin 1 out of bushing 3; Fit bushing 3 on the shaft; Fit the spare share pin1 into place; Replace bushing 2 and washer 4and tighten screw 5. Fig.6-12 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 52/67