Version 2: Fig.9-5B Thread dial Table 1 is mount on the apron and is integrated part of it. To engage the thread dial to lead screw loose screw 12, turn the body around stud 21 so that thread dial gear engaged to lead screw. Then tighten screw 12. To disengage proceed by opposite order. Two scales are available for metric version thread dial 1;3;5 and 1;2;7. To shift from one scale to another pull scale 2 or push it utmost in thread dial body. Inch version thread dial is provided with one scale only 1,2,4. Number 1 not shown on the scales. It is related to each notch of the scale . Setting the thread dial for operation 1- Set the late for cutting thread of any of shown on the table pitch.
2- Set the carriage on initial point and engage the half-nut to lead screw. 3- Engage the thread dial. 4- Reset the thread dial (position the number that relates to the pitch so that align with the pointer). 5- Cut the thread first start; disengage the half-nut and go back to the initial point. C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 62/67