9.2 THREAD DIAL If ordered the thread dial (option) is delivered with the machine and when cutting thread it makes easy setting the cutting tool tip into the thread pitch shown on table 1. By stud 21 and lock screw 12 the thread dial is mount on apron right side wall. Version 1: Fig.9-5А Thread dial Table 1 is mount on thread dial body and is integrated part of it. To engage the thread dial to lead screw loose screw 12, turn the body around stud 21 so that thread dial gear engaged to lead screw. Then tighten screw 12. To disengage proceed by opposite order. Two scales are available for metric version thread dial 1;3;5 and 1;2;7.
To shift from one scale to another loose nut 3 and turn back scale 2, place a gear (Z=14 for 1,2,7 and Z=15 for 1,3,5) from nut 3 side and tighten nut 3. Inch version thread dial is provided with one scale only 1,2,4. Number 1 not shown on the scales. It is related to each notch of the scale . C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 61/67