ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

9 OPTIONAL ACCESSORIES 9.1 TAPPER TURNING ATTACHMENT Taper turning attachment is a lathe option used for machining internal and external taper surfaces up to 250 mm length and a angle +10 o . It is mounted to the carriage base plate. The taper turning attachment design ensures high accuracy of machined surfaces, easy and reliable operation. Setting the taper turning attachment for operation is as following (Fig.9-2):

By turning in nut 5 , bolt 2 is tighten to slide 6 of taper turning attachment; Bolt 2 goes in bracket 1 and is tighten by nuts 3; Bracket 1 is positioned on a suitable place along rear bed slide way and is fixed by three bolts 4 and a plate; Loose bolts 7 and 8; By screw 9 guide 10 is turned at the desired angle. The angle is read out on the scale; Tighten bolts 7 and 8; Having taper turning attachment set as instructed above the workpiece machined surface must comply with following requirements: The cylindrical area in the beginning should not be greater than 8 mm (clearances in the system not eliminated); Angle deviation not greater than + 15’ .

Fig.9-3 Taper turning attachment C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 60/67