9.3 INDEPENDENT JAW CHUCK AND FACE PLATE The independent jaw chuck and face plate without jaws are used for chucking workpieces having non-rotary shapes when machining their rotary surfaces (mostly holes). Chucking of such workpieces is performed by independent adjustment of each jaw on independent jaw chuck and using an additional angle accessory. Mounting a chucking device on spindle nose is described under section 4.8.1 or 4.8.2. Workpiece chucking on independent jaw chuck Fig.9-6 is performed by jaw 5, screw 4 and key 10. Each jaw is independently adjusted. Warning: It is not admitted to exceed the speed marked on the chucking device.
The speed must be selected in relation to workpiece weight and shape, symmetric and centrifugal force that may be generated during rotation. Fig.9-6 Independent jaw chuck Fig.9-7 Face plate C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 64/67