9.4 DRIVER PLATE (CENTER LATE) The driver plate (also known as centre plate) is a lathe option. Mounting method for the driver plate on spindle nose is same as described for 3-jaw self-cantering chuck section 4.8.1 or section 4.8.2. A dead centre 3 is mount into spindle taper hole and into tailstock quill taper whole a live centre is mount. A lathe dog 4 is mount on the workpiece to be machined then the workpiece is mount between above said centres. The late dog 4 and drive pin 1 transmit rotation to the workpiece. It is absolutely forbidden to operate dead centre on tailstock. Fig.9-8 Driver plate C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 65/67