9.5 RESTS (Fig.9-9 and Fig.9-10) Follow rest and steady rest are lathe options used for additional support of the workpiece. Follow rest is fixed to the carriage base plate by bolts 9. To support a workiece loose bolts 8 by one-two turns. By handles 3 and screws 5 move the quills 6 so that the points 7 touch the workpiece. At this position tighten bolts 8 to lock the quills. The follow rest is used to support long workpiece of small diameter. Fig.9-9. Follow rest C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 66/67