hp Color 9850mfp FIXING 9.8 Replacing the fixing temperature sensor 4, and removing and reinstalling the fixing temperature sensor 2 and thermostat L Caution: • After reinstalling the fixing temperature sen- sor 4, be sure to check that the sensor sec- tion is in touch with the fixing roller. If not, the temperature control may go abnormal or the low fixing temperature abnormality. • Be sure to check that the wiring harness is not in touch with the fixing roller. the fixing temperature sensor 4 may detect Caution: • Be sure to follow the cautions and steps given below when removing and reinstalling The thermostat L is an essential safety part. III DIS./ASSEMBLY (SP00 -018 0KC). Caution:
• After completion of the installation of the thermostat L, be sure to check that the wir- ing harness is not in touch with the fixing lower roller. • tioning it properly with a positioning jig Be sure to fasten the thermostat L after posi- (65AAJG031KC). Be sure to apply screws with screw lock paint. And also be sure to conduct this adjustment under the pressure-released condition and the temperature low condition of the fixing roller L. A. Periodically replaced parts/cycle • Fixing temperature sensor 4: Every 2,500,000 copies 3-93