Q5690A TRAY UP/DOWN D. Reinstalling the rear drive Note: • Reinstall the rear drive following the removal steps in reverse, but be sure to make posi- tioning adjustments of the remaining paper detection gear at "C. Removing the up/down drive." 1. Conduct in reverse the steps 10 to 6 of "C. 2. With the up/down plate at its lower most posi- Removing the up/down drive." tion, stop the actuator of the remaining paper detection gear [1] at the position where it detects the remaining paper sensor 4 (PS105) [2] and install the gear [3]. [2] [3] III DIS./ASSEMBLY [2] [1] 3. Conduct in reverse the steps 1 of "C. Removing the up/down drive." 3-15