AH Motion Controller – Hardware Manual _4 4.6 Wiring AH Motion CPU Modules 4.6.1 Specifications of Inputs and Outputs AHxxEMC-5A 4-24 Products Model name Internal power consumption External power consumption AH08DA-5B 0.25 W 2.2 W AH08AD-5C 1.6 W - AH08DA-5C 0.25 W 3.7 W AH04PT-5A 2 W - AH08PTG-5A 0.7W 4W Temperature measurement module AH04TC-5A 1.5 W - AH08TC-5A 1.5 W - AH10EN-5A 1.6 W - AH15EN-5A 1.6 W - AH10SCM-5A 1.2 W - AH15SCM-5A 1.2 W - Network module AH10DNET-5A 0.9 W 0.72 W AH10PFBS-5A 1 W - AH10PFBM-5A 2 W - AH10COPM-5A 0.8 W - AHRTU-DNET-5A 0.75 W 0.72 W Remote I/O module AHRTU-PFBS-5A 2 W - AHRTU-ETHN-5A 2.16 W - General Specifications AHxxEMC-5A Remark Execution The program is executed cyclically.
The inputs and outputs can be Cyclically refreshed inputs/outputs controlled through the direct inputs Input/Output control Direct inputs/outputs (DX device) and direct outputs (DY device). IEC 61131-3 Ladder diagram (LD), continuous function Programming language chart (CFC), structured text (ST), and sequential function chart (SFC). Instruction execution speed 0.3 ms/K steps 1-32000 The scan cycle time can be Constant scan cycle (ms) (The scan cycle can be increased by one specified by parameters. millisecond.) Program capacity (step) 256K steps Installation DIN rails or screws