Chapter 3: Software Application and Usage b. Dynamic DNS Device Settings: Dynamic DNS 2 3 4 5 6 7 8 10 9 1 b. Dynamic DNS 1. Dynamic DNS: Click on this function key to activate its submenu and configure the following Dynamic DNS (-Domain Name Server) settings as listed below. 2. Enable Dynamic DNS: Check this box to enable the Dynamic DNS service. 3. Dynamic DNS Server www.dyndns.org: Click this link to access the DynDNS web site. This is the server name where the DDNS Service is registered. 4. DNS System: Dynamic DNS (Item#2 above) is enabled, you can select from the options: Custom or Dynamic from the selection menu. Select "Custom" to use your own system as the DNS server.
Select Dynamic to use the pre-configured Dynamic DNS as your server. 5. Hostname: Enter the name you want to use for the remote host server. 6/7. Username/Password: Enter the username and the password for the remote host user. 8. Check time (HH:MM): Enter the time the SIMLP card first registers with the DNS server in the HH:MM Format. (e.g. 07:25, 19:30) 3-27