AS Series Programming Manual Example: Step 1: Select “Manual + Flags” for the setting option “I/O module allocation setting when Power ON” in HWCONFIG. _2 Step 2: Plan an entire module allocation and download the I/O allocation table to HWCONFIG Step 3: When 16AP, 04DA, and 08AM are not needed in the application, you can set the flags SM231 (indicating 16AP), SM233 (indicating 04DA) and SM235 (including 08AM) to OFF to meet the actual I/O module placement. You do not need to change their order number in the PLC program. Actual I/O Module Placement The order numbers, the model names and their corresponding device numbers in the complete I/O allocation list.
2-124 Order 0 1 2 3 4 5 6 7 number Model AS332 16AP 16AP 04AD 04DA 06XA 08AM 08AN Corresponding device X1.0/Y1.0 X2.0/Y2.0 D28040 D28060 D28080 X3.0 Y3.0 starts from