User Manager Editor The bottom portion of the User Manager editor contains the list of defined users. You can add, edit, or remove users through the steps described in the following sections. Adding Users and Assigning Access Levels To add a new user: 1. Click Add . The Add User dialog box opens. 2. In the User Name field, type the name of the new user. 3. Use the Access drop-down menu to view and select the access level for the new user. The following table provides a list of available access levels and the corresponding description: 4. Click OK to save the information and close the dialog box. Or, click Cancel to close the dialog box without saving the information. 5.
For password-protected access, you will need to add a password to each user account that you want to protect. For details, see Creating or Changing a Password on page 129. Editing Users There may be times when you need to change the access level for an existing user. To edit a user: 1. From the Users list, select the user you wish to edit. 2. Click Edit . The Edit User dialog box opens. 3. Use the Access drop-down list to select the new access level for the user. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 127 Access Level Description Operator This user can start and stop execution. Technician This user can teach basic values. Engineer This user can create and edit many values.