Data Mapper Editor Creating or Changing a Password After you have created your user list, you can use the Change Password dialog box to add a password, or change an existing password, for one or more of your user accounts. NOTE: Access to the Change Password dialog box requires a successful login. For example, to add a password to the Engineer account: 1. Sign in to the Engineer account. 2. Open the Change Password dialog box. From the ACE menu bar, select File > Change Password . The Change Password dialog box opens. 3. If the user account is already password-protected, enter the corresponding password in the Old Pass- word field. 4. Enter the new password in the New Password field. 5.
Verify the new password by entering it into Verify New Password field. 6. Click OK to save the changes. Or, click Cancel to close the dialog box without saving. Data Mapper Editor The Data Map allows the user to associate different date items in the workspace as inputs for other data items configured as outputs. For example, you can associate a V+ digital input signal as an input triggering an ACE PackXpert object to run when the signal is turned on. When entries are added to the list, the conditions are continuously checked. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 129