Password-Protect Configuration Data Password-Protect Configuration Data Password protection prevents end users from modifying the default configuration parameters such as the minimum joint travel. By default, the access level is restricted, providing view-only access to the protected parameters. Depending on the version you have, restricted parameters may editable only by Adept personnel. Contact Adept Technical Support for details and for a password, if applicable. Change Access Level To change the access level: 1. Contact Adept Technical Support to verify if your version allows end-user access to restricted para- meters. If so, Adept can provide you with the required password. 2.
From the Controller menu, select Change Access Level to display the following dialog: Access Level Change Dialog 3. Enter the correct password to change the access level. 4. Click OK to save the changes. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 275