TRANSMISSION Ch 2 page 196 Push components of the cooler changeover valve into the bore. 1 = Piston 2 = Compression spring Figure 614 Preload cooler changeover valve with the pressure piece and fasten it with the fixing plate (1). (S) Pressure piece 850316-00379 Figure 615 Push components of the main pressure valve (1), converte safety valve (2) and retarder valve (3) into the bores.
1 = Main pressure valve with fixing plate *Piston *Compression spring *Valve bush 2 = Converter safety valve with fixing plate *Control piston *Compression spring *Valve bush 3 = Retarder valve with fixing plate *Compression spring *Piston *Piston Figure 616 Preload the converter safety valve by means of a suitable pressure piece and fasten it with the fixing plate (1). Install the main pressure valve (2) and the retarder valve (3) analogously (Figure 616). Figure 617 SHOP MANUAL