TRANSMISSION Ch 2 page 202 By means of the lifting tackle install oil supply flange on housing I until contact. (S) Hook 850317-00069 Figure 638 Install the pins 10x36 (1). By means of the torx screws (2 ) fasten the oil supply flange on housing I. Tightening torque (M8/10.9x45) MA = 23 Nm Figure 639 Install intermediate sheet (1) until contact. It is forbidden to reinstall the intermediate sheet. In case of repair a new intermediate sheet is generally to be installed! Figure 640 Installed the slotted pins 10x16 (1). Put the primary pump (2) onto the slotted pins and install it until contact. Figure 641 SHOP MANUAL WARNING