Ch 2 page 265 TRANSMISSION Assemble the cab tilt cylinder and tilt the cab up. Figure 852 Connect all the hydraulic hoses from the cab and the heating system to the cab. Make sure you follow position markup that is applied during disassembly. Refill hydraulic tank (For fluid type and specifications, refer to the Hyundai Operating & Maintenance Manual Chapter 6) Refill A/C system Assemble the final 2 drive shaft points on each side of transmission (LH and RH). Turn flange to reach screws if necessary. Figure 853 4 screws Torque: 141Nm Figure 854 Assemble transmission cover and bottom guard. Figure 855 Figure 856 SHOP MANUAL