UNDERCARRIAGE / Center Joint When replacing body (7) with a new one, the following procedures are required. IMPORTANT: When installing bushing (5) to body (7), grease and molybdenum disul- phide should be applied to the fit- ting surface. ST 2670 7 Push and install bushing (5) to body (7). 1. Clean body (7) and bushing (5). 2. Push bushing (5) to body (7) by using a press. Pushing force: 0.5 to 1.5 ton Pushing tool: ST 2670 5 W105-03-03-029 W3-3-10