. OPERATION EXPLANATION OF COMPONENTS 3 - 17 REVERSE TRAVEL SPEED INDICA It is possib le to set the reverse travel speed by selectin g on e of t he hav e the fo llowing ratio to the f orward travel speed. (1) Approx. 20% slower than fo (2) Same a s forward travel spe (3) Approx. 20% faster than for (4) Approx. 40% faster than for (5) Approx. 60% faster than for If th e travel speed is set to mat ch the nature of the operation before starting, it b ecomes un necessary to ca rry out any gearshifting operation whe n operating the steering, forward-reverse, gear s speed rang es.
The speed ranges If it is desir ed to raise the effici ency in dozing operations , set the reverse travel speed to a Wh en traveling on rough groun d or when carrying ou t pushing-up operations, set the reverse travel speed to a lower spe T o set th e reverse travel spe ed, press the left or ri ght s ide o f the r everse travel speed setting switch. E ach tim e the right side of t he switch is pressed, the set trave s peed b ecomes faster. e the left side of th ecomes slower. e switch is pressed, the set trave he reverse travel speed. s turned to the ON position, the t to approx.
20% faster than the s pressed once, the reverse trave E s ach tim peed b I nside b When th ar graph (H) shows t e starting switch i r f everse travel speed is se travel speed. orward I f the lef t side of the switch i reverse t rave s peed w ill become the same as the forward trave l speed. 3 rd spee d is the top limit, so it cannot be set to a higher trave rave s peed.