TANDEM PUMP REPLACEMENT 2.9 10 Connect the tandem pump case drain fitting and hose. Torque the fittings and hoses to the specifications listed in the Torque Chart in Section 2.13 page 2 - 43. 2 IMPORTANT When making repairs to the hydraulic system, keep the work area and parts clean. Use caps and plugs on all open line and ports. 11 Connect the auxiliary gear pump outlet fittings and hoses to the gear pump. (fig. C3482) Follow the Torque Chart in Section 2.13 page 2 - 43 when tightening fit- tings and hoses. IMPORTANT Inspect fitting o-rings and flares for marks or dam- age. Replace if necessary. 12 Connect the inlet fitting and hose to the auxiliary gear pump. (fig.
C3482) Torque the fittings and hoses to the specifications listed in the Torque Chart Section 2.13. IMPORTANT Follow the Torque Chart In Section 2.13 when tight- ening fittings and hoses. 13 Connect the charge pressure outlet line from the tan- dem pump to the hydraulic brake valve. (fig. C3483) Case drain connection C3481 (1700 shown) C3481 (1700 shown) Gear pump To control valve C3482 C3482 Gear pump From the reservoir C3482 C3482 Brake valve Charge line C3483 2-18