. OPERATION OPERATION 13. Inspect tires. WARNING 14. Inspect rims. WARNING 3 - 71 8. Check dump body Check for any crac ks, embedded foreign objects 9. Check for damage Repair any damag e and tighten any loose bolts. 0. Check for damage to gauges, lamps on the instr ument panel and l oose bolts. Check for damage to the panel, gauges and lamp s. If any problem i s found, rep lace the parts. Clean on the surface. Tig 1. Check rear view m irror, under view mirror Check that the mir rors are not damaged. Replac e them if they are damaged. Clean the surface of t and adjust the angl e so that the operator can see the area to th e rea r and under the machine from the seat. 2.
Check for damage to the seat belt and mounting clamps. Check for damage Check for any lo When the belt h the clamps are Check for damage to seat belt and mounting cla mps. If damages are found, re place wit h the new o Check for any lo ose bolts of the clamps moun ting the equipmen t to the mac hine. Tighten any loo When the belt h as been used for a long time, if any externa l damage or fray ing of the belt can be broken or deformed, replace t he seat belt. worn or damaged tires a re used, they may burst and caus e serious injury r death. use the following tires.
ves of less than 15% of that of a new tire ven wear or with stepped-type wear at has reached the cords, or with cracks in the d cords arated) surface ad repaired tubeless tires d or abnormally damaged tires, which do not o ensure safety, do not ear: Tires with a tread groo ves of less than 15% of that of a Tires with extreme une ven wear or with stepped-type w amage: Tires with damage th rubber Tires with cut or pulle Tires with peeled (sep Tires with damaged be Leaking or improperly Deteriorated, deforme seem usable heck the rims (wheels) and rings for deformation, corrosi on and cracks. particular, check the si de rings, lock rings and rim flang