EXPLANATION OF COMPONENTS OPERATION HEAD LAMP SWITCH This switch(1) lights up the head lamps. OFF position: Lamps are out ON position: Lamps light up REAR LAMP SWITCH This switch(2) lights up the rear lamps. OFF position: Lamps are out ON position: Lamps light up GLOW SWITCH This switch(3) actuates the electrical heater to warm up the engine intake air. OFF position: The preheating is not actuated. AUTO position: AUTO preheating is actuated. The length of the preheating time varies according to the ambient temperature when the ambient tem- perature is below approx. -5єC. I position:
This is used when AUTO preheating is not enough to start the engine in cold weather sim- ply with the glows witch at the AUTO position. When the switch is released, it will return to the AUTO position. II position: This is used when carrying out preheating manually without using AUTO preheating. When the switch is released, it will return to the OFF position. 3-10