CONTROLS AND INDICATORS 4. DIRECTION INDICATOR LEVER The direction indicator lever is used to switch on/off the direction indicators. 1 Switching on the right direction indicators: Press direction indicator lever to the front ‘1’ Switching on the left direction indicators: Draw direction indicator lever to the back ‘2’ After you have passed the bend, the direction indicator lever au- tomatically returns to its home position and the direction indica- tor will be switched off. 2 75_100 5. HORN BUTTON The horn sounds when you press the horn button. 75_018 6. LIGHT SWITCH The light switch is used to switch on/off the main headlights, the side lamps and the taillights.
Switching off the lights Switch in ‘0’ position Switching on the parking light Turn the light switch to the front until it reaches position The side lamps and the taillights light up. Switching on the low beam Continue to turn the light switch until it reaches position All lights which were already switched on in position (parking light) remain lit. In addition, the low beam is switched on. The low beam control lamp lights up. How to flash one’s lights (high beam) In order to flash your lights, you need to draw the lever briefly in the direction of the steering wheel. The high beam is only switched on as long as you draw the lever.
The high beam con- trol lamp will also light up for that time. Switching on the high beam In order to switch on the high beam you must press the lever completely down. In this position the lever locks in and the high beam control lamp lights up. 75_291 4-17