6 © 2002 6.5 Belt Drives Service and Maintenance © 24 598 1 To retension belt, remove one or more shims 3 – as may be required – from inside. Place removed shim(s) outside on removed half- pulley 2. Turn engine over while tightening bolts 1 to prevent belt being pinched. Check, tension and change belts only with the engine off. Refit guard, if provided. 6.5.16 Tensioning /Changing Compressor Belt Take off outer half-pulley 2. Replace belt if necessary. Remove hex. bolts 1. ! © 24 598 1 © 24 598 1 © 24 599 1 © 24 599 1