GETTING TO KNOW YOUR VEHICLE 89 1. Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the divider side gates. 5. Lock the center handle to secure the panel into place. Storage Position The storage position for the bed divider is at the front of the truck bed which maximizes the bed cargo area when not in use. 2 To install the bed divider into the storage position, perform the same steps as you would for the divider position, except position the divider fully forward in the bed against the front panel. Aligning Gate To Slots 3. Rotate the side gates closed so that the outboard ends are secured into the intended slots of the bed.
Center Handle And Lock 4. Rotate the center handle horizontally to secure the side gates in the closed position. 1 — Center Handle Lock 2 — Handle 3 — Unlocked Position 4 — Locked Position 2. With the side gates open, position the divider so the outboard ends align with the intended slots in the sides of the bed. Storage Position Side Gates Closed