GETTING TO KNOW YOUR VEHICLE 95 4. Pull down on the handle to ensure the Slide Locking Lever is fully engaged. Do this for both the left and right side. 5. Unclip the stowage straps, and re-snap them to the bow. 6. Unfold the Tonneau Cover to the second panel position. 2 Released Position J Hook Under Truck Flange 3. Swing the J Hook from the handle and push the handle to the center and up, ensuring that the J Hook is under the truck flange. Push up on the handle firmly, locking it into the latched position. 1 — Front Of Truck 2 — J Hook NOTE: Make sure the bumper is in front of the truck flange bead. Incorrect Folding — Will Cause Damage NOTE:
When folding the second and third panels, the sections MUST be held together to avoid damage to the cover material. Fold the panel gently. Do not allow the panels to drop under their own weight. Pull Handle Downward