OPERATION Procedure for operation 1. If working mode selector switch (1) is pressed, the Working Mode screen is displayed on the monitor. 2. Press function switches F3 or F4 at the bottom of the screen or working mode selector switch (1) to change the mode selection one at a time. If no switch is touched for more than five seconds, the selected working mode is automatically set as the working mode and the screen changes to Item 3 and Item 4. Remark To return to the standard screen without changing the working mode, press function switch F5. 3. After selecting the desired mode, press function switch F6 and the mode is displayed in the center of the monitor display. (Example:
If power mode is selected: P) 4. After two seconds, the pilot monitor display at the top right of the screen is highlighted in orange. PC200LC-8 2-27