SAFETY PRECAUTIONS BEFORE STARTING OPERATIONS As an operator of the machine, you are responsible for the safe operation of the machine at all times regardless of the situation. Although KOMATSU cannot cover all operating conditions that pose a major hazard here are a few basic situations to avoid when using the excavator during work or travel operations. It is advised to study these and always be aware of them before starting your work operations. Failure to do so may result in damage to the machine or injury to the operator and other personnel.
PRE-OPERATIONAL CHECKS Before starting your work operations it is important to perform a Pre-operational Check to be sure your equipment is in safe operating condition. If any problems are found during your Pre-operational Check, have them repaired immediately. Never operate a machine that is unsafe, damaged or in need of repair. Failure to perform a pre-operational check before starting work operations may result in damage to the machine or injury to the operator and other personnel.
Remark It is important that a pre-operational check be performed at the beginning of your work shift, even if you are taking the machine operations over from another operator, always perform a pre-operational check before you start work. STARTING YOUR WORK OPERATIONS Before operating the machine, walk around it and check for people or objects that might be in the way. Do not start the engine if warning tags have been attached to the steering wheel or control levers. Sound your horn to warn others in the area before starting the engine or moving the machine. Operate the machine in a seated position only, with the seat belt fastened snugly around your waist.
Do not allow anyone in the cab or on the machine during operations. Be sure all personnel are clear from your work site before starting any work operations. Inspect for damaged hoses which may leak or spray fluids. PC400LC-7E0 1-21