PRODUCT OVERVIEW CONTROL EQUIPMENT The equipment in the control room makes remote control operation possible. It consists of the instrument panel, which is connected to the engine by a wire harness, and the remote control handle, which is connected by control cables to the engine control lever and marine gear. Instrument Panel Equipment and Functions The instrument panel is located at the helm. The following instruments enable you to start or stop the engine and to monitor its condition during operation. B20-Type 2 1 3 4 Figure 10 1 – Alarm lamps 2 – Tachometer 3 – LCD 4 – Switches (push-buttons) 042563-00X00 Control panel switches All switches are push-buttons.
Start switch Glow switch Pushing this switch operates the starter and starts the engine. Pushing this switch for the specified time heats the glow plug in the combustion chamber. It becomes red-hot, facilitating fuel ignition. This assists starting in cold weather. 042564-00X00 042566-00X00 Stop switch Power switch Pushing this switch stops the engine. Pushing this switch turns on or off the power. 042565-00X00 042567-00X00 18 YM Series Operation Manual