24. SERVICE PROCEDURE 24.8.2 CHANGE OIL IN FINAL DRIVE CASE The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. dh WARNING Prepare the followings. l ‘Container to catch drained oil: Min 15 ie (3.96 US gal, 3.30 UK gal) l Refill capacity: D58E-1, IA 13 e D58E-16 14 e D58P-1 14.5 Socket wrench (3.43 US gal, 2.86 UK gal) (3.70 US gal, 3.08 UK gal) e (3.83 US gal, 3.19 UK gal) l 1. Set a container to catch the oil under drain plug 8. 2. Remove drain plug @ and drain the oil. After draining the oil, tighten drain plug @. 3. Refill the specified quantity of engine oil through oil filler 0.
For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 4. Check that the oil is at the specified level. For details, see “24.5 EVERY 250 HOURS SERVICE”. \ AE080980 3-59