Operation—Operator's Station Secondary Exit Tool IMPORTANT: FOR SECONDARY EXIT. Use tool (1) to break window. Always keep tool in machine. 1— Secondary Exit Tool T137043 —UN—08JAN01 TX14740,0001C99 -19-08JAN01-1/1 Opening Upper Front (Secondary Exit) Window NOTE: The washer and wiper cannot operate with the upper front window opened. 1. Press lock release lever (1). T136264 —UN—18DEC00 1— Lock Release Lever TX14740,0001C96 -19-08JAN01-1/2 2. While holding the upper and lower handles on the window, pull window up and back until it catches in auto lock (2) for convenient storage overhead. CAUTION: Prevent possible injury from window closing.
DO NOT rely on auto lock alone to hold the window in the up position. Always lock the pin in the cab frame boss hole. T136265 —UN—18DEC00 3. Slide the lock pin (3) into the cab frame boss hole and turn to lock. CAUTION: Prevent possible injury from window closing. Upper front window comes down very forcefully. Close window only when sitting on operator’s seat. Guide window down slowly. 2— Auto Lock 3— Lock Pin TX14740,0001C96 -19-08JAN01-2/2 2-1-9 060313 PN=37