Section 4 - Cam Follower Assembly - Group 04 Cam Follower Assembly (04-01) M11 Page 4-7 Visually inspect the cam follower shafts for scoring or damage. If scoring or damage is found, the cam follower shaft(s) must be replaced. Assembly Use clean 15W-40 oil to lubricate the cam follower shafts and the injector and valve cam followers. The cam follower levers, supports and shafts have es- tablished wear patterns and must be installed in the same position from which they were removed. The shaft end supports are not interchangeable. Install the end support (1) on the shaft.
Install the valve cam follower (2), the injector cam follower (3), the valve cam follower (4), and the shaft support (5) on the shaft. Install the remaining cam followers and supports in the same sequence. Install the two cam follower shaft assemblies in the com- mon center support (6).