Section 4 - Cam Follower Assembly - Group 04 Cam Follower Assembly - Rebuild (4-02) M11 Page 4-9 Drill a 1/8 inch hole in the plugs and use a standard dent puller to remove the plugs from the shafts. Clean the cam follower parts with solvent. Dry with com- pressed air. Inspection Visually inspect the cam follower shafts for scoring or damage. Measure the outside diameter of the cam follower shaft journals. Shaft Journals O.D. mm in 33.991 MIN 1.3382 34.009 MAX 1.3389 If scoring or damage is found or the shafts are not within the specifications, the shaft(s) must be replaced.