Cooling System/Water Pump (standard model) INSTALL WATER PUMP 1. Attach pump cover to pump housing using a new gasket and tighten cap screws to 45 N·m (33 lb-ft). 2. Install water pump, placing a new gasket between the pump cover and cylinder block. Tighten cap screws (B) to 50 N·m (35 lb-ft) and nut (C) to 40 N·m (30 lb-ft). CD30629 -UN-04MAY98 3. Connect coolant hoses (A). CD,CTM125,163 -19-01DEC97 CTM3274 (01JUL99) 30-16 Saran Liter Engines 060799 PN=215 NOTE: Some water pumps may have the cap screw (A) which protrudes from rear cover. Be sure that the cylinder block has the corresponding foundry recess. If necessary, grind the cylinder block as shown.
-UN-10MAY95 A—Cap screw B—14 mm (0.55 in.) C—90 mm (3.50 in.) D—4 mm (0.15 in.) E—25 mm (1 in.) CD30422 -UN-10MAY95 CD30423 CD,3274,G30,29 -19-01FEB94 30 16