16 HT25 - CONTROLS DESCRIPTIONS ic0219h.eps If engine does not start on first attempt, check that all interlock requirements have been met, return switch to STOP position, and try again. Release button, then turn ignition switch all the way clockwise. Release when engine starts. Key will return to first position. Turn counterclockwise to stop engine. This button helps start cold engine. To operate, first turn ignition switch to first position. If ambient temperature is below 40° F (4° C), press and hold button for 15 seconds. If ambient temperature is below 20° F (-7° C), press and hold button for 30 seconds. This three-position switch starts or stops engine.
Insert key and turn clockwise to first position. Press glow plug button to warm cold engine if necessary. See instructions for glow plug button. p Turn switch all the way clockwise. Glow Plug Button Ignition Switch