HT25 - SAFETY 21 Before operating any equipment, review emergency procedures and check that all safety precautions have been taken. EMERGENCY SHUTDOWN - Turn ignition switch to stop position or push remote engine stop button. Low voltage current can injure or kill. Almost one-third of work-related electrocutions result from contact with less than 440 volts. Most electric strikes are not noticeable, but indications of a strike include: If any of these occur, assume an electric strike has occurred. When working near electric cables, remember the following: Electricity follows all paths to ground, not just path of least resistance.
Pipes, hoses, and cables will conduct electricity back to all equipment. EMERGENCY PROCEDURES Electric Strike Description Popping noises Arcing electricity p EMERGENCY PROCEDURES Power outage Smoke Explosion