11 Fieldwork 11.9 Crop receptacle / straw receptacle 67087 83478 11.9.4 Adjusting the stationary knives (standard straw chopper) Observe the general warnings at the beginning of the "Fieldwork" chapter. Danger! The cutting cylinders of the straw chopper can run on even if the drive is switched off. Death or serious injuries! Never touch any machine parts that con- tinue running. Wait until all machine parts have com- pletely stopped moving. Danger! Sharp-edged machine parts, sharp blades. Death or serious injuries! Wear safety gloves. Adjusting the stationary knives 1 3 The length of cut can be varied by relocating the sta- tionary knives (1) between position (A and B).
Slacken off bolts (2) on both sides. Swivel stationary knives to any position, using wrench. 2 2 70 19668 A Bolt down bolts (2) on both sides. B 71 19669 Removing the stationary knives Unlock and pull out spring clip of rod (3). Pull out rod (3). Remove the stationary knives. Push in rod (3) and secure with spring clips. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 229 Position of stationary knives / knife carrier Long chopped straw A Chop shorter B Chop longer For operation in rape it is recommended setting the knife carrier all the way down.