13 Maintenance 13.6 Chassis 67089 Unscrew bolt (1). Fill in new oil. Check oil level , top up if necessary. Remove dirt from bolt (1). Screw in bolt (1) with sealant. Repeat this procedure on the other side of the machine. 1 23392 65 86784 13.6.7 Checking the final drive oil level DOMINATOR 130 Park the machine on level ground. Observe the general warnings at the beginning of the "Maintenance" chapter. Caution! Machine operation with unpermitted or pol- luted lubricants. Machine damage. Ensure a clean environment. Use suitable and clean tools. Use permitted lubricants. Lubricants must be free of pollution. Unscrew bolt (1). The oil level must be up to the bore at bolt (1).
Top up oil if required. Remove dirt from bolt (1). Screw in bolt (1) with sealant. Repeat this procedure on the other side of the machine. 1 66 Right side 23393 86786 13.6.8 Draining the final drive oil DOMINATOR 130 Park the machine on level ground. Observe the general warnings at the beginning of the "Maintenance" chapter. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 311