Hydrostatic drive system 205 X To change the load value for the attached equipment: press the И but- ton on the steering wheel. The input window for the load value opens in the on-board computer. X Increase the load value by pressing the u button on the steering wheel. or X Decrease the load value by pressing the t button on the steering wheel. Driving mode й Deactivates the work limiter И Activates the work limiter o Deactivates cruise control X Press the 9 button on the steering wheel. The input window for the load value closes. X To deactivate: press the й button on the steering wheel.
Driving with the cruise control lever Overview Status indicator for working mode cruise control with work limiter : Work limiter deactivated ; Work limiter activated = Stored speed cannot be reached (red arrow) ? Speed reduced by the driver (blue arrow) Depending on the vehicle's equipment, your vehicle may have a cruise control lever. X To activate: activate working mode cruise control ( Y page 203). X Engage the hydrostatic drive system ( Y page 199). X Press the И button on the steering wheel. The input window for the load value opens in the on-board computer. Selecting a gear X If necessary, increase the load value by pressing u on the steering wheel. or X To downshift:
briefly push the cruise con- trol lever away ; from the steering wheel. The transmission control shifts down one gear. or X If necessary, decrease the load value by pressing the t button on the steering wheel. X To upshift: briefly pull the cruise control lever towards ? the steering wheel. The transmission control shifts up one gear. X Press the 9 button on the steering wheel. The input window for the load value closes. Z