12. OPERATION 1. CHECK DUMP BODY, FRAME, TIRES, CYLINDERS, LINKAGE, HOSES FOR DAMAGE, WEAR, PLAY Check the dump body, frame, tires, cylinders, linkage, and hoses for cracks or excessive wear or play, and carry out repairs if any abnormality is found. 2. REMOVE DIRT FROM AROUND ENGINE, AROUND BATTERY, RADIATOR Check that there is no dirt or dust accumulated around the engine or radiator. Check also that there is no flammable material (dry leaves, twigs, etc.) accumulated around the battery, or engine, muffler, turbocharger, or other high temperature parts of the engine. Remove any dirt or flammable materials that are found. 3.
CHECK FOR LEAKAGE OF WATER, OIL FROM AROUND ENGINE Check that there is no leakage of oil from the engine or leakage of water from the cooling system. If any abnormality is found, repair it. 4. CHECK FOR OIL LEAKAGE FROM TRANSMISSION CASE, DIF- FERENTIAL CASE, FINAL DRIVE CASE, HYDRAULIC TANK, HOSES, JOINTS Check for any oil leakage, and if any abnormality is found, repair the location of the leakage. When checking for oil leakage, check for signs of oil leaking from the undercover or signs of oil dripping on the ground. 5. CHECK FOR LOOSE AIR CLEANER MOUNTING BOLTS Check that there are no loose mounting bolts. If any loose bolts are found, tighten them. 6.
CHECK DUMP BODY MOUNT RUBBER Check for any cracks, embedded foreign objects, or loose bolts. 7. CHECK HANDRAIL FOR DAMAGE, LOOSE BOLTS If any damage is found, repair it. Tighten any loose bolts. 8. CHECK FOR DAMAGE TO GAUGES, LAMPS, LOOSE BOLTS Check that there is no damage to the panel, gauges, or lamps, and if any abnormality is found replace the part. Clean any dirt from the surface. 2-47